Disconnect - Enterasys Matrix E1 1G694-13 Configuration Manual

9.2.2.11 disconnect

Use this command to close an active console port or Telnet session.
disconnect {A.B.C.D | console}
Syntax Description
A.B.C.D
console
Command Defaults
None.
Command Mode
Read-Write.
Examples
This example shows how to close a Telnet session to host 10.1.10.10:
Matrix>disconnect 10.1.10.10
Telnet session from 10.1.10.10 disconnected.
This example shows how to close the current console session:
Matrix>disconnect console
Console session disconnected.
Specifies the IP address of the Telnet session to be
disconnected. This address is displayed in the output
shown in Section 9.2.2.10.
Closes an active console port.
Matrix E1 Series (1G694-13) Configuration Guide
Network Management
Monitoring Network Events and Status
9-23