Getting Help With Cli Syntax; Cli Screen Scrolling Commands - Enterasys Matrix E1 1G694-13 Configuration Manual

Startup and General Configuration

Getting Help with CLI Syntax

For information about setting the IP address, refer to
Refer to the instructions included with the Telnet application for information about establishing a
Telnet session.
3.1.7 Getting Help with CLI Syntax
As shown in Figure
commands that share the same initial keywords, by entering a question mark (?) in the CLI
command string. This feature is useful if you are unsure of all the keywords in a command, or what
other commands complete a configuration step.
Figure 3-4 Using ? to Display Command Options
This example shows how to use the ? to display commands beginning with show priority:
Matrix>show priority ?
Matrix>show priority
3.1.8

CLI Screen Scrolling Commands

CLI commands that require more than one screen to display will prompt you to enter the following
keystrokes to return to the command prompt or to continue displaying output.
Table 3-2 Screen Scrolling Commands
Key Sequence
Ctrl+C
S
M
3-8 Matrix E1 Series (1G694-13) Configuration Guide
3-4, you can display command options, such as syntax details and a list of
classification
queue
Command
Return to the command prompt.
Scroll through the output.
Show "more" -- the next screen in the command output.
Section 3.2.2.11.