Network Management
Managing Network Addresses and Routes
9.2.3.4
show ip route
Use this command to display IP routing table entries.
show ip route
Syntax Description
None.
Command Defaults
None.
Command Mode
Read-Only.
Example
This example shows how to display the IP routing table.
Matrix>show ip route
destination
----------------------------------------------------------------------------
90.0.1.0
127.0.0.1
----------------------------------------------------------------------------
Table 9-4
Table 9-4 show ip route Output Details
Output
destination
gateway
flags
Use
Interface
9-28
Matrix E1 Series (1G694-13) Configuration Guide
gateway
90.0.1.0
127.0.0.1
provides a detailed explanation of the command output.
What It Displays...
Destination address IP route mask.
IP address of the gateway router.
Route status; possible values are U=up,
G=route to a Gateway, H=route to a host.
Number of times a route entry was used to route packets.
Type of interface.
flags
Refcnt
Use
0
UH
0
Interface
2
host.0.1
8
host.0.1