Set Spantree Txholdcount - Enterasys Matrix E1 1G694-13 Configuration Manual

5.2.1.18 set spantree txholdcount

Use this command to set the maximum BPDU transmission rate. This is the number of BPDUs
which will be transmitted before transmissions are subject to a one-second timer.
set spantree txholdcount txholdcount
Syntax Description
txholdcount
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to set the transmit hold count to 5:
Matrix>set spantree txholdcount 5
Success setting tx hold count to 5.
Reviewing and Setting Spanning Tree Bridge Parameters
Specifies the maximum number of BPDUs to be
transmitted before transmissions are subject to a
one-second timer. Valid values are 1 to 10.
Matrix E1 Series (1G694-13) Configuration Guide
Spanning Tree Configuration
5-23