Show Spantree Txholdcount - Enterasys Matrix E1 1G694-13 Configuration Manual

Spanning Tree Configuration
Reviewing and Setting Spanning Tree Bridge Parameters

5.2.1.17 show spantree txholdcount

Use this command to display the maximum BPDU transmission rate.
show spantree txholdcount
Syntax Description
None.
Command Defaults
None.
Command Mode
Read-Only.
Example
This example shows how to display the transmit hold count setting:
Matrix>show spantree txholdcount
Tx hold count = 3.
5-22 Matrix E1 Series (1G694-13) Configuration Guide