Table of Contents
Advertisement
CLI Task
VLAN (port, clear)
VLAN (port, set)
VLAN (port, show)
VLAN (set)
VLAN (show)
VLAN egress (clear)
VLAN egress (set)
VLAN name (clear)
VLAN name (set)
Command Function and Syntax
Resets the port's 802.1Q port VLAN ID to the host VLAN ID 1. For
details, refer to
Section
clear port vlan port_string
Sets the port VLAN identifier (vlan_id) for one or more ports. For
details, refer to
Section
set port vlan port_string vlan_id
Displays ports associated with a particular 802.1Q port VLAN ID.
For details, refer to
show port vlan [port_string]
Creates a new IEEE 802.1Q VLAN, or enables, or disables an
existing VLAN. For details, refer to
set vlan vlan_id {create | enable | disable}
Displays all information related to a specific VLAN or all VLANs
known to the device (static and dynamic). For details, refer to
Section
6.2.1.1.
show vlan [vlan_id]
Removes ports from a VLAN egress list. For details, refer to
Section
6.2.4.2.
clear vlan egress vlan_id port_string
Adds or removes ports on the VLAN egress list for the device. This
determines which ports will transmit frames for a particular VLAN.
For details, refer to
set vlan egress vlan_id port_string [untagged]
Removes the name of a VLAN from the VLAN list. For details, refer
to
Section
6.2.2.4.
clear vlan name vlan_id
Sets the ASCII name for a new or existing VLAN. For details, refer to
Section
6.2.2.2.
set vlan name vlan_id vlan_name
6.2.3.3.
6.2.3.2.
Section
6.2.3.1.
Section
Section
6.2.4.1.
6.2.2.1.
Advertisement
Table of Contents
