Table of Contents
Advertisement
802.1Q VLAN Configuration
Configuring the VLAN Egress List
6.2.4
Configuring the VLAN Egress List
Purpose
To assign or remove ports on the VLAN egress list for the device. This determines which ports will
transmit frames of a particular VLAN. For example, ports 1, 5, 9, 8 could be assigned to transmit
frames with VLAN ID=5.
The port egress type for all ports defaults to tagging transmitted frames, but can be changed to
untagged. When a port is set to untagged, the port will transmit frames without a tag header. This
setting is usually set to configure a port connected to an end user device.
Commands
The commands used to configure VLAN egress are listed below and described in the associated
section as shown.
•
set vlan egress
(Section
•
clear vlan egress
6-18
Matrix E1 Series (1G694-13) Configuration Guide
6.2.4.1)
(Section
6.2.4.2)
Advertisement
Table of Contents
