Set Host Vlan - Enterasys Matrix E1 1G694-13 Configuration Manual

6.2.5.2

set host vlan

Use this command to create a secure VLAN where only designated users are allowed access. A host
VLAN can be specifically created, for example, for device management. This would allow a work
station connected to the host VLAN to manage all ports on the switch, while making management
secure by preventing access via ports assigned to other VLANs.
set host vlan vlan_id
NOTE: Before you can assign a VLAN as the host VLAN, you must create a VLAN first
using the set of commands described in
Syntax Description
vlan_id
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows setting VLAN 7 as the host VLAN.
Matrix>set host vlan 7
Host vlan set to 7.
Section 6.2.2.
Specifies the number of the VLAN to be set as the host
VLAN.
Matrix E1 Series (1G694-13) Configuration Guide
802.1Q VLAN Configuration
Setting the Host VLAN
6-23