Set Trunk - Enterasys Matrix E1 1G694-13 Configuration Manual

Port Configuration
Setting Port Trunking

4.2.10.2 set trunk

Use this command to create, enable and disable trunks.
set trunk trunk_name {create | disable | enable}
Syntax Description
trunk_name
create | disable |
enable
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to create a trunk named "blue":
Matrix>set trunk blue create
Successful trunking operation for blue.
4-32 Matrix E1 Series (1G694-13) Configuration Guide
Specifies the name of the trunk port to be created,
disabled or enabled.
Creates, disables or enables a trunk with the specified
name.