Table of Contents
Advertisement
Never make behaviors that damage safety labels, such as moving the position of the nameplate,
warning signs, safety symbols, nomenclature markings, cable markings and the like attached to the
Warning
controller, or hiding them by putting paint or covers.
Indicate the robot installation areas and hazard areas with distinct shapes, color, or styles, so that
Caution
they are clearly distinguished from other facilities and equipment.
1.2.4
Emergency stop
The emergency stop function is actuated in emergency where a worker or object enters a hazard area. All the
emergency stop switches are installed at places easily accessible from outside the safety areas.
When the emergency stop function is actuated, the robot will immediately stop moving in any case.
The servo system power of the robot will be cut off and the motor brake will be actuated.
On the teach pendant screen, an emergency stop massage will appear.
1.2.4.1 Emergency stop switches
One emergency stop switch is installed each at the controller and the teach pendant. In case of emergency, press an
emergency stop switch.
Hyundai Robotics
Right-side View
Figure 3 Safety label attachment points: side (left) / inner side (right)
Maintenance manual for Collaborative Robot
Case Inside View
Safety | Safety measures_
13
Advertisement
Table of Contents
