Table of Contents
Advertisement
Replacing Staple Cartridge
When the staple cartridge needs to be replaced, a message appears on the display. When this
message appears, load a new staple case into the staple cartridge.
Important
• The use of staple cartridges not recommended by Fuji Xerox may degrade quality and performance. Use only
staple cartridges recommended by Fuji Xerox.
Replacement Procedure (for Finisher-B1)
When the message Staple Cartridge R1 is displayed on the display, follow the instruction below
to replace the staple cartridge with a new one.
1.
Make sure that the machine is not operating,
and open the front door.
2.
Grasp the handle R1 of the staple cartridge
holder, and pull out the holder to the right,
towards you.
3.
Take the staple cartridge out of the finisher.
Note
• The staple cartridge is firmly inserted. A slight force is
required to pull the cartridge out of the finisher.
4.
Pinch both sides of the empty staple case with
your fingers (1), and remove the staple case
from the cartridge (2).
7.1 Replacing Consumables
293
Advertisement
Table of Contents
