Table of Contents
Advertisement
Resetting the Counter
After replacing the 160K Maintenance Kit, perform the required control panel operations to reset
their respective counters.
When replacing the 160K Maintenance Kit, be sure to reset the counter on the control panel.
1.
On the control panel, press the < > and <OK>
buttons at the same time.
This displays the [Consumables Menu].
2.
Press the < > until [Reset Counter] is
displayed.
3.
Press either the < > or <OK> button to select
so [Fuser Assembly] is displayed.
4.
Press the < > so [Trans.BeltCleaner] is
displayed.
5.
Press either the < > or <OK> button to select.
6.
Press the <OK> button.
7.
This resets the counter for the IBT belt
cleaner.
8.
Press the <Settings> button to close the menu.
Consumables Menu
Serial Number
Consumables Menu
Reset Counter
Reset Counter
Fuser Assembly
ResetCounter
Trans.BeltCleaner
Press OK to reset
Trans.BeltCleaner
Resetting Fuser
Trans.BeltCleaner
Resetcompletedfor
Trans.BeltCleaner
7.1 Replacing Consumables
309
Advertisement
Table of Contents
