Table of Contents
Advertisement
A.6
Installing the HDD Extension Kit
The HDD Extension Kit (optional) must be installed in any of the following instances.
• To enable the following features
Sample Set*
Font Downloading, Feature Enhance Kit, IEEE802.1x authentication, IPsec certificate, ThinPrint,
Finisher (optional), and IC Card Reader function (optional)*
1
*
The function can be used by enabling a RAM Disk when no HDD Extension Kit (optional) is
installed.
2
*
The IC Card Reader may not be supplied with the printer in some regions. Contact your dealer
for details.
• To enhance the following installed features
Number of forms that can be registered, electronic sort feature performance, spool capacity,
and number of log entries.
This section describes how to install the HDD Extension Kit (optional) on the printer.
Installation procedure
1.
Press the <
switch to turn off the power.
Note
• Make sure that there is no indication on the display, and
<Energy Saver> button is off.
2.
Open the front cover.
398
A Appendix
1
1
, Secure Print*
, Mail Print, Private Charge Print*
HDD Extension Kit (hard disk)
> side of the printer's power
1
1
, Charge Print*
, Delayed Print*
2
.
1
,
Advertisement
Table of Contents
