Table of Contents
Advertisement
Finisher-B1 (optional) and Finisher-B1 with Booklet Maker Unit (optional)
14
13
12
11
No.
1
Tray attachment
2
Booklet maker unit
3
Booklet maker side cover
4
Booklet staple cartridge [R2/R3]
5
Top cover
6
Right middle tray
7
Creaser unit
8
Staple cartridge [R1]
9
Front door
10
Finisher-B1
11
Front transport door G
12
Hole-punch waste container [R4]
40
2 Basic Operation
Name
Install this attachment when delivering A4
middle tray without stapling.
Refer to
• "Installing the Tray Attachment" (P. 41)
Staples creased outputs.
Open this cover when replacing the booklet staple cartridge.
Contains staples. Remove this cartridge when replacing or adding staples, or
removing jammed staples.
Open this cover to remove jammed papers.
Stapled or creased outputs are delivered here.
Creases outputs in half.
Contains staples.
Open this cover when removing jammed paper or replacing staples.
Staples prints.
Open this cover when discarding punch scraps.
Collects scraps from the puncher.
1
2
3
Description
or B5
paper to the right
4
5
6
7
8
9
10
Advertisement
Table of Contents
