Fuji Xerox DocuPrint C5155d User Manual page 171

Setting
User Detail StoreUser
Setup Details
Failed Access
Log
Save Remote
Account
Del Remote
Account
Charge
Print
-
PJL Receive
Command
PJL Output
Command
Sets whether to store authentication information to non-volatile memory
(NVM) or HDD Extension Kit (optional).
• [NVM] (default)
• [Hard Disk]
Note
• This item appears only when [Local Accounts] is set in [Login Type] while
[Network Accounting] is set in [Accounting] > [Accounting Type].
Sets whether or not to record failed authentication to [Error History Report]
when authentication fails for the preset number of times in 10 minutes. This
is to detect invalid accesses.
• [Off]
• [On] (default)
When [On] is specified, the number of authentication failures recorded
can be specified as a value from 1 to 600.
Note
• Authentication failures are only recorded in [Error History Report], and
access denials, as in "[Panel Settings]" (P. 158) are not recorded.
Sets whether or not to save remote accounts.
• [Disabled] (default)
• [Enabled]
Note
• This item appears when HDD Extension Kit (optional) is installed and
[Remote Accounts] is selected for [Login Type].
Deletes user information for remote authentication saved by setting [Save
Remote Account] to [Enabled].
Note
• This item appears only when HDD Extension Kit (optional) is installed,
while [Remote Accounts] is set in [Login Type].
Sets charge printing that uses authenticated user information.
Note
• This item appears when the hard disk (optional) is not installed and the
Extension System Memory (optional) is installed.
Reception of remote printing commands can be controlled by PJL
commands. When [Off] is set or no PJL command has arrived on the printer,
the [Receive Control] setting described later is used.
• [Off] (default)
• [On]
Printing of remote print jobs can be controlled by PJL commands.
• [Off] (default)
• [On]
Description
5.2 Common Menus Setting
171