Fuji Xerox DocuPrint C5155d User Manual page 41

No. Name
13 US 2/3 Hole Punch Kit (US
standard) or
2/4 Hole Punch Kit (optional)
14 Center tray (Finisher transport
cover F)
Note
• The power cord connected to the Finisher-B1 is a connecting cord dedicated to the printer.
Do not connect this cord to any other devices than the printer.
• The HDD Extension Kit (optional) is required when installing the finisher.
 Installing the Tray Attachment
When delivering A4
outputs more neatly by installing the tray attachment supplied with the right middle tray.
1. Remove the tray attachment from the rear of
the right middle tray.
2. Install the tray attachment onto the middle of
the right middle tray as shown in the diagram.
Hole-punches outputs.
Note
• The distance between the two holes made with the US 2/3 Hole Punch Kit
(US standard) is 70 mm, which is different from the 80
with the 2/4 Hole Punch Kit.
Prints are delivered here when they are unable to be delivered to the right
middle tray. Pull the cover upward when removing jammed papers.
Note
• Remove outputs delivered to the center tray frequently.
or B5 paper to the right middle tray without stapling, you can stack the
Description
mm distance made
2.1 Main Components and Functions
41