Table of Contents
Advertisement
A.10
Notes and Restrictions
Notes and Restrictions on Using the Printer
This section lists the notes and restrictions that apply to the printer.
HDD Extension Kit (Optional)
• An installation of the HDD Extension Kit (optional) is required for this printer in the following
cases:
• Unavailable functions without installing the HDD Extension Kit:
Sample Set
Print
function/IPsec Certificate function/ThinPrint/Finisher (optional)/IC Card Reader function
(optional)
*1
*2
• Improvement of capabilities with an installation
number of recorded items (forms)//sort feature performance/spool capability/number of
log
• An abrupt shut down of the printer due to a power failure or other disruption when HDD
Extension Kit is installed may corrupt data on the hard disk.
• Power off processing is performed internally on the printer for a while after the power is
switched off (<Energy Saver> button blinks). Make sure the <Energy Saver> button is
completely turned off before switching on the printer again.
• When HDD Extension Kit is installed, it can be specified as the save destination of print data
from lpd, SMB, or IPP. The hard disk is the fixed save destination for ESC/P, HP-GL/2, and PCL
forms. The save destination for these forms cannot be changed.
• Initializing the hard disk deletes additional fonts.
• The hard disk which has once used with a printer cannot be used for others.
• A hard disk is needed when obtaining the job history report in CSV format using CentreWare
Internet Services.
When printing results do not match settings
• This is caused by insufficient print page buffer capacity, and print results may differ from
settings as described below. Installation of extension system memory is recommended
whenever any of the following occurs.
• 1-sided printing is performed when 2-sided printing is specified.
• Print jobs are cancelled (When a page cannot be rendered in the buffer, the job that includes
that page is canceled.)
• Printing results may not come out as specified when printing of a 1,200 dpi single dot or line
is specified. This is due to the characteristics of Xerography.
*1
/Secure Print
*1
/Font downloading/Security Extention Kit function/IEEE 802.1x Authentication
*2
The function can be used by enabling a RAM Disk when no HDD Extension Kit is installed.
The IC Card Reader may not be supplied with the printer in some regions. Contact your
dealer for details.
*1
/Print E-mail/Private Charge Print
*1
*1
/Charge Print
/Delayed
A.10 Notes and Restrictions
413
Advertisement
Table of Contents
