Fuji Xerox DocuPrint C5155d User Manual page 91

Note
• When printing using the lpr command, use the lpr command to specify the number of copies. In such cases, the
[Quantity] setting on the control panel becomes invalid. If you do not specify the number of copies using the
lpr command, the printer assumes 1 set.
The following is an example of printing DocuWorks files from a computer using the lpr command.
Note
• In the following examples, the bold characters are input characters.
• Spaces are indicated with .
Example
At the command prompt, enter the command as follows.
Example: A command for printing "Report.xdw" when the printer's IP address is 192.168.1.100.
C:\>lpr-S192.168.1.100-PlpReport.xdw
<Enter> key
3.11 Direct Printing of DocuWorks Files
91