Fuji Xerox DocuPrint C5155d User Manual page 147

[SOAP]
Network/Port
SOAP
Setting
Port Status
Port Number
[ThinPrint]
Note
• This item appears only when HDD Extension Kit (optional) is installed.
®
• To use ThinPrint feature, contact our Customers Support Center or your dealer for details.
Network/Port
ThinPrint
Setting
Port Status
Port Number
SOAP
Port Status
SOAP
Port Number
Sets whether to enable or disable the SOAP port at printer start-up.
• [Enabled] (default)
• [Disabled]
Important
• If the printer runs out of memory when the port is enabled, the port is sometimes
automatically disabled. If this happens, either disable unused ports, or change
the memory allocation under [Allocate Memory].
Sets the port number from 1 to 65535. (See *2 on P. 202.)
• [80] (default)
Note
• Set only unique port numbers. Note, however, that InternetServices/IPP/SOAP/
UPnP/WSD (See *6 on P. 202) ports and Internet services that use HTTP protocol
can share the same port number.
ThinPrint
Port Status
ThinPrint
Port Number
ThinPrint
SSL/TLS
Sets whether to enable or disable the ThinPort port at printer start-up.
• [Enabled]
• [Disabled] (default)
Sets the port number from 1 to 65535. (See *2 on P. 202.)
• [4000] (default)
Note
• Set only unique port numbers.
Description
Description
5.2 Common Menus Setting
147