Table of Contents
Advertisement
[Admin Menu]
The [Admin Menu] menu consists of six submenus: [Network/Port], [System Settings], [Printer
Settings], [Allocate Memory], [Image Quality], [Adjust Finisher] and [Init/Delete Data].
[
Network/Port
Allows you to configure host interfaces and the settings required to enable their communication.
[LPD]
Port Status
136
5 Control Panel Settings
]
Network/Port
LPD
Setting
Sets whether to enable or disable the LPD port at printer start-up.
• [Enabled] (default)
• [Disabled]
Note
• The IP address must be set to enable the LPD port.
Important
• If the printer runs out of memory when the port is enabled, the port is sometimes
automatically disabled. If this happens, either disable unused ports, or change
the memory allocation under [Allocate Memory].
LPD
Port Status
LPD
Print Mode
LPD
PJL
LPD
Connect Time-Out
LPD
TBCP Filter
LPD
Port Number
LPD
Maximum Sessions
LPD
Print Queue
Description
Advertisement
Table of Contents
