Table of Contents
Advertisement
4.
Pinch both sides of the empty staple case with
your fingers (1), and remove the staple case
from the cartridge (2).
5.
Insert the front side of the new staple case
into the staple cartridge (1), and then push
the rear side into the cartridge (2).
6.
Push the staple cartridge into the finisher until
it clicks into place.
7.
Close the front door.
Note
• If the front door is not completely closed, a message will
appear and the machine remain paused.
Replacement Procedure (for Finisher-C1 with Booklet Maker)
When the message Staple Cartridge R2 / R3 is displayed on the display, follow the instruction
below to replace the staple cartridge with a new one.
1.
Make sure that the machine is not operating,
and open the front door.
296
7 Maintenance
Advertisement
Table of Contents
