Table of Contents
Advertisement
Setting Example: Changing the Sleep Mode Timer
In this example, we will set the Sleep Mode Timer for operations in common menus to 60
minutes.
1.
Press the <Settings> button on the control
panel to display the menu screen.
2.
Press the < > button until [Admin Menu] is
displayed.
Note
• If you went past the desired item, return to the item by
pressing the <
3.
Press the < > or <OK> button to select.
Move on to the next lower level.
Note
• If you pressed the <
item, return to the previous screen by pressing the <
or the <Back> button.
• To start over from the beginning, press the <Settings>
button.
4.
Press the < > button until [System Settings]
is displayed.
5.
Press the < > or <OK> button to select.
Move on to the next lower level.
6.
Press the < > button until [Sleep Mode
Timer] is displayed.
7.
Press the < > or <OK> button to select.
The current set value is displayed.
8.
Press the < > or < > button to display [60
Minutes Later].
Note
• Holding down the <
the options in a circular fashion.
9.
Press the <OK> button to confirm your
selection.
The value is accepted.
10. The setting is now complete.
Press the <Settings> button to return to the
[Ready to print] screen.
128
5 Control Panel Settings
> button.
> or <OK> button on the wrong
> or <
> button scrolls through
Settings
LanguageEmulation
Settings
Admin Menu
Admin Menu
Network/Port
>
Admin Menu
System Settings
System Settings
Alert Tone
System Settings
Sleep Mode Timer
Sleep Mode Timer
•1 Minutes Later
Sleep Mode Timer
60 Minutes Later
Sleep Mode Timer
•60 Minutes Later
Ready to print
K
C
M
Y
Advertisement
Table of Contents
