Starting Up And Shutting Down The System - Canon CXDI-40G COMPACT Service Manual

7. Starting up and Shutting Down the System

Perform the following sequences when starting up and shutting down the system.
1. Sequence for Starting up the System
Perform the following sequence when turning the system power on.
If you do not perform the correct sequence, the imaging unit cannot be recognized, resulting
in an error.
(This is because the system communicates with the imaging unit when turning the system
on.)
The power box cannot be turned on in conjunction with turning on the control PC.
1) Turn on the main power of the power box.
2) Turn on the control PC.
Note:
Ccrstart.bat should be registered in Windows Startup.
2. Sequence for Turning the Power off (Shutdown)
1) From OPU, select SYSTEM → [SHUTDOWN] or [SHUTDOWN after transfer]
The control PC automatically turns off.
2) Turn off the main power of the power box.
2. Installation
- 33 -