Touchpanel As Pointing Device - Connected Via Cresnet - Crestron C2N-DVP4DI Reference Manual

Crestron C2N-DVP4DI
Reference Guide – DOC. 6177A
"Project Properties" Window
6. Send the project to the touchpanel.
7. From Viewport, set the C2N-DVP4DI to Touch command # 8
8 – Crestron Tablet (TPS serial touchpanel)
NOTE: Each time a new touchscreen is connected to the Touchscreen/Mouse port,
and each time you switch between touchscreens, you must perform the
CALTOUCH command.
NOTE: CALTOUCH is not required when any type of mouse is connected.
NOTE: CALTOUCH may not always be necessary when "touch 8" is selected,
because it is a Crestron touchscreen.
Touchpanel as Pointing Device - Connected via
Cresnet
1. Create a page with full screen RGB window in VT Pro-e for the touchpanel.
2. In "RGB Video Properties" window, select the Design tab and select Pad 1
or Pad 2.
Digital Video Processor
Digital Video Processor: C2N- DVP4DI • 75
: