Cursor On/Cursor Off; Output Resolution Selection - Crestron C2N-DVP4DI Reference Manual

Crestron C2N-DVP4DI
Reference Guide – DOC. 6177A
DVP4DI>input ?
Format is "INPUT 1 2", where Parameter 1 is 1,
2, 3, or 4 to select one of the four RGB inputs,
and Parameter 2 is the new Horizontal
Resolution, from 320 to 1920,
or "A" to Auto Calibrate this input,
or "D" for Default for this input,
or "N" for No HDTV Overscan for this input,
or "L" to Lock Auto Calibrate On for this input.

Cursor On/Cursor Off

Allows the user to display or not display the cursor on a display device. The
commands are:
•
cursor on - displays cursor.
•
cursor off - does not display cursor.
NOTE: The default for a mouse connected to the C2N-DVP4DI is cursor on.
The default for a touchscreen connected to the C2N-DVP4DI is cursor off.

Output Resolution Selection

Allows the user to select the output resolution. The commands are:
•
output – Displays the current resolution setting.
•
output ? – Displays the resolution options.
For example, the resolution options are: 1600, 1365, 1280, 1024 or 800.
To change the resolution, type output <resolution> and press Enter. For example,
type output 1280 and press Enter. The system prompts you to reboot to accept the
change.
Touch
Allows the user to select the touchscreen or mouse that will be used as a pointing
device. The commands are:
Touch - displays what is currently selected.
Touch ? - displays list of available pointing devices.
DVP4DI>touch ?
TOUCH [input]
where input =
0 - Program Control
1 - Microsoft mouse*
2 - Smart (SC3,SC4,SC5)
3 - Smart (SC6,SC7,..)
4 - Microtouch
5 - Dynapro SC3
6 - Dynapro SC4
7 - Elo Graphics
8 - Crestron Tablet
9 - Mouse Systems Mouse
10 - Logitech MouseMan
11 - Wacom Tablet
12 - QTC Touch Controller
No parameter - current input selection
NOTE: Refer to "Specifications" on page 2 for mouse requirements.
Digital Video Processor
Digital Video Processor: C2N- DVP4DI • 19