Uploading Touchpanel Projects - Crestron C2N-DVP4DI Operation Manual

Crestron C2N-DVP4DI
Operations Guide – DOC. 6112
NOTE: You can also click Check Program to display the header information of
the currently loaded program.
Open Viewport and select File Transfer | Send Program.
NOTE: Unlike X-Generation processors, the 2-Series processor does not require a
permanent memory image. Also, the 2-Series adds the ability to automatically
retrieve the currently compiled program from the control system. Simply verify that
the Retrieve Current Program before overwriting check box is selected.
"Send Program" Window

Uploading Touchpanel Projects

You can use the network connection to upload VT Pro-e projects to any Cresnet
touchpanel. Compiled projects for TPS panels are contained in VTZ files; projects
for all other touchpanels are contained in HEX files.
Before uploading, open Viewport and click Diagnostics | Report Network Devices
to verify that the touchpanel is being detected by the control system. (As with any
network device, touchpanels must be identified by unique hexadecimal network IDs.
These IDs are set in the SIMPL Windows program.)
To upload a project:
1. From VT Pro-e: Click the Project | Upload button
click File | Upload Project.
From Viewport: Click File Transfer | Send Touchpanel or press Alt+T.
2. Select the network ID of the touchpanel, as set in SIMPL Windows, from
the drop-down list.
3. Browse to the HEX or VTZ file to be uploaded. If the file is a HEX file,
click Open to begin the transfer.
If the file is a VTZ file, choose the pages to send to the TPS panel. The
choices are as follows:
- All Files in Project: sends the entire project.
- Only Changed Files: sends only the files that are different from those
that are currently stored in the panel.
Digital Video Processor
on the toolbar, or
Digital Video Processor: C2N-DVP4DI • 35