Sympodium System Setup - Crestron C2N-DVP4DI Reference Manual

Crestron C2N-DVP4DI
Option 2 Diagram
Smart Sympodium
Serial Output
Option 3 Diagram
Smart Sympodium
Serial Output
Reference Guide – DOC. 6177A
Crestron C2N-DVP4DI
Touchscreen
DVI/VGA
DVI Input
Mouse
Output
CNSP-141
•
Option 3: In addition to options 1 and 2, a Crestron TPS-series touchpanel
can be used concurrently with the Sympodium. This way, you can access all
the functionality described in options 1 and 2, using the Pad Area of a
Video/VGA window on a touchpanel.
Crestron C2N-DVP4DI
DVI/VGA
Touchscreen
DVI Input
Output
Mouse
CNSP-141
Crestron TPS-Series
NOTE: TPS-5000 and TPS-6000 have serial ports and can be used to function with
Sympodium, depending on programming.

Sympodium System Setup

Equipment Required
•
C2N-DVP4DI
•
24 VDC, 75 watt power supply for C2N-DVP4DI (recommended minimum
power supply)
•
Smart Sympodium
•
Computer with Smart board software loaded
•
RGB to DVI cable (Crestron Part Number: JDCMDVI-VGAMF-1)
•
Two Crestron DVI to RGB adaptors
•
VGA male-to-male cable
•
RS-232 straight through cable with no DTR/DSR (pins 2, 3, and 5 are
connected). Crestron part number: CNSP-141
•
Cresnet cables
•
Video source cable and BNC to BNC cable (Optional)
Digital Video Processor
DVI/RGB
COM (1-4)
(1-4)
DVI/RGB
COM (1-4)
NET
(1-4)
Touchpanel
Digital Video Processor: C2N- DVP4DI • 83
PC with Smart
Board Software
VGA
COM Port
Output
CNSP-141
PC with Smart
Board Software
VGA
COM Port
Output
CNSP-141