C2N-Dvp4Di Video And Computer Annotation (Built-In Telestrator) - Crestron C2N-DVP4DI Reference Manual

Digital Video Processor
80 • Contents
C2N-DVP4DI Video and Computer Annotation
(Built-in Telestrator)
The C2N-DVP4DI has Video and Computer Annotation (built-in telestrator),
eliminating the purchase of addition equipment. This feature enables the user to
draw or write over a variety of video and computer images by touching and dragging
a finger over the touchpanel.
The freeze/unfreeze function can freeze the video image to allow annotation on a still
picture. Freeze works on both CNX-DVP4 and C2N-DVP4DI, but the image appears
better on the C2N-DVP4DI because of the de-interlacing feature.
The C2N-DVP4DI telestrator has eight colors and three brush types:
•
The colors are: red, green, blue, yellow, cyan, magenta, white, and black.
•
The brushes are: thin brush 2 pixels wide, the medium brush 4 pixels wide,
and wide brush 8 pixels wide.
Setting up the C2N-DVP4DI for built-in telestrator with serial mouse:
1. Setup the C2N-DVP4DI for serial mouse input. Refer to page 14 for more
information about serial mouse installation.
2. Draw an RGB/Video window in VT Pro-e on the page where you want the
Telestrator to function.
3. Select the "Video Properties" window and select Design tab.
"Video Properties" Design Tab
4. Enable the Touch/Pad Area and save and compile the project.
5. Add the Touch Out Format symbol to the C2N-DVP4DI. Refer to "Device
Extender Symbols for Touch Input and Touch Output Control" on page 61.
Crestron C2N-DVP4DI
Reference Guide – DOC. 6177A