Crestron C2N-DVP4DI Reference Manual page 92

Digital Video Processor
88 • Contents
Detail View of Touch Out Format Symbol
NOTE: When you set up the COM port to communicate with the computer, the
proper settings are 9600 baud, no parity, 8 data bits, 1 stop bit, and no handshaking.
Option 3: If you are using a touchpanel as a touch input device, as well as the
Sympodium, you must perform the programming described for option 2, and the
following additions:
1. Add a device extender to the C2I-TPS Touchpanel Interface definition.
Right-click on the C2I-TPS definition in Program View and select Insert
Device Extender from the drop-down menu. Select C2N-DVP4DI Touch
In Format. Add a new signal name as shown below:
Crestron C2N-DVP4DI
Reference Guide – DOC. 6177A