Crestron C2N-DVP4DI Reference Manual page 72

Digital Video Processor
68 • Contents
"Pointer Device Properties" – Events Tab
Select the Settings tab and ensure the following settings:
Click time – 9
Tap time – 9
Lift off time – 6
Stabilization – 0
Averaging – 2
Low pass filter – 0
Check the Use liftoff packet box.
"Pointer Device Properties" – Settings Tab
3. Connect the RS-232 straight-through cable from the C2N-DVP4DI COM
port (A-D) to a computer that has the serial mouse driver installed. Version
number of the serial mouse driver must be 2.56.18. Refer to instructions for
serial mouse installations in "Connecting a Pointing Device" on page 60.
4. Create a page in VT Pro-e with a full screen RGB window for the C2N-
DVP4DI.
5. In the "RGB Video Properties" window, select the Design tab and enable
the Touch/Pad Area.
Crestron C2N-DVP4DI
Reference Guide – DOC. 6177A