Output Dvi Video From Pc To C2N-Dvp4Di - Crestron C2N-DVP4DI Reference Manual

Digital Video Processor
DVI/RGB Pinouts
Pin 11
Pin 6
VGA(Female)
16 • Contents
Pin 5
Pin 1
DVI/RGB Connections
VGA (RGB)
SHIELD
PIN R6, G7, B8
PIN 13
PIN 3
PIN 2
PIN 1
PIN 5,10
PIN 9
PIN 14
PIN 12
PIN 15

Output DVI Video from PC to C2N-DVP4DI

To output DVI video from a Microsoft Windows-based (98/NT/2000) PC to the
C2N-DVP4DI, the current DVI driver on the PC must be updated with a plug and
play monitor driver. This is accomplished via the "Display Properties" window.
NOTE: The following procedure assumes that the PC has a DVI video card and
driver installed. A Matrox Graphics
1. Right click on the desktop and click Properties from the pulldown menu to
open the "Display Properties" window.
2. Select the Settings tab.
3. Select the Matrox DVI video display driver from the Display field.
4. Click Advanced to open the "Matrox DVI" driver window.
5. Select the Monitor tab.
6. Click Change to open the Update Device Driver Wizard.
NOTE: Depending on the type of driver, the Change button may reside on a tab
other than the Monitor tab.
7. Click Next.
8. Select Display a list of all drivers... and click Next.
Crestron C2N-DVP4DI
Pin 16
DVI CABLE FUNCTION
SHIELD GROUND
C5 ANALOG GROUND
C4 HORIZONTAL SYNC
C3 ANALOG BLUE
C2 ANALOG GREEN
C1 ANALOG RED
PIN 15 GROUND (+5V & HV SYNC)
PIN 14, 16 POWER +5V/HDT PLUG DETECT
PIN 8 VERTICAL SYNC
PIN 7 DDC DATA
PIN 6 DDC CLOCK
DVI driver is used in the following example.
TM
Reference Guide – DOC. 6177A
Pin 1
Pin 8
C1
C2
DVI (Male)
Pin 17
Pin 24
C3
C4
C5