Reserved Join Numbers - Crestron C2N-DVP4DI Reference Manual

Crestron c2n-dvp4di digital video processor: reference guide

Hide thumbs Also See for C2N-DVP4DI:

Specification sheet (3 pages)

Operation manual (52 pages)

Table Of Contents

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

Table of Contents

Digital Video Processor

52 • Contents

Appearance Tab

Color: Face: Transparent

36. Select the "Start" page.

37. Make sure the "Start" page is marked as first in the project.

38. Select File | Compile Project.

Uploading VT Pro-e Projects to the C2N-DVP4DI

Since the C2N-DVP4DI can operate as a touchpanel interface, you can upload VT

Pro-e projects directly to it. Projects are loaded in the compact flash memory.

Compiled projects are contained in VTZ files. You must be connected to another

control system to upload projects when in the slave mode. Use the following

instructions to upload a project:

1. Open VT Pro-e and click the Upload Project icon

click File | Upload Project), or Open Viewport, establish communication

with the C2N-DVP4DI (refer to "Establishing Communications" in the

latest version of the C2N-DVP4DI Operations Guide, Doc. 6112) and click

File Transfer | Send Touchpanel or press Alt+T.

2. Select the network ID of the C2N-DVP4DI, as set in SIMPL Windows,

from the drop-down list.

3. Browse to VTZ file to be uploaded and choose the pages to send to the

C2N-DVP4DI. The choices are as follows:

All Files in Project: sends the entire project.

Only Changed Files: sends only those files in the project that have

changed. NOTE that if any pages in the panel are not present in the

project, those pages will be deleted from the panel.

Additional choices include Do not send graphic files and Do not send

sound files. These are often very large files that need not be reloaded

with every transfer.