Table of Contents
Advertisement
Digital Video Processor
14 • Contents
Connector Information
RS-232 Control and Computer Ports
Use a DB9 straight-through cable (do not use a null-modem cable).
Touchscreen/Mouse
This cable is supplied by the touchscreen or mouse vendor (except for a Matisse
cable); refer to "Unique Viewport Commands" on page 18.
Serial Mouse
The C2N-DVP4DI is shipped with a Microsoft compatible 9-pin mouse. For
installation instructions, refer to page 60.
RGB to BNC Cable
A RGB to BNC cable has an RGB DB15 connector on one end and five BNC
connectors on the other end. The BNC connectors are red, blue, green, horizontal and
vertical. The horizontal and vertical cables are stamped H and V, respectively. The
RGB to BNC connection standards are:
•
RGB Sync on Green (red, green and blue only; horizontal and vertical not
connected)
•
RGB H Sync (red, green, blue and horizontal only; vertical not connected)
•
RGB H Sync/V Sync (red, green, blue, horizontal and vertical connected)
NOTE: If you connect the horizontal and/or vertical cables for RGB Sync on green,
no video will be displayed.
Composite Video Connections
The C2N-DVP4DI has 12 composite video inputs available. Refer to the following
diagram.
Composite Video Connections
COM 1
COM 2
COM 3
VIDEO INPUT 1
VIDEO INPUT 2
A
B
C
A
Y
C
Y
P
P
Y
B
R
DVI/RGB
ELECTRONICS INC
., ROCKLEIGH, NJ 07647
USA
1
2
3
4
S-Video Cable Adapter
If you are using a 4-pin DIN S-video cable, you will need to use a 4-pin (female)
DIN to BNC adapter (adaptor not included).
Crestron C2N-DVP4DI
TOUCHSCREEN
COM 4
MOUSE
VIDEO INPUT 3
B
C
A
B
OUTPUT
Y
C
Y
P
P
Y
P
B
R
B
DVI/RGB
DVI/RGB
DVI/RGB
5
6
7
8
Reference Guide – DOC. 6177A
LAN
COMPUTER
VIDEO INPUT 4
C
A
B
C
G
C
Y
C
P
Y
P
P
R
B
R
DVI/RGB
9
10
11
12
Advertisement
Table of Contents
Troubleshooting
