Crestron C2N-DVP4DI Reference Manual page 71

Crestron C2N-DVP4DI
Reference Guide – DOC. 6177A
Software Required for Touch the PC
•
SIMPL Windows Version 2.04.11 or higher, Symbol Lib/device 232 or
higher, Crestron Database 15.9.9 or higher
•
VT Pro-e Version 3.1.1.7 or higher
Touch the PC Procedure
1. Install the serial mouse software driver on the PC to be controlled. Refer to
the latest version of the Serial Mouse Control Driver Software
Programmer's Guide, Doc. 5916 in the Downloads | Product Manuals
section of the Crestron website (www.crestron.com).
2. After installing the serial mouse driver, confirm the driver settings.
From the Start menu, select UPDD | Settings. Click the Button Modes tab
and ensure that the following are selected: Touchdown Left mode, Left
Button, Show on menus, Down 1, 3 and 5 – Touchdown, Up 2, 4 and 6 – Lift
off.
"Pointer Device Properties" – Button Modes Tab
Select the Events tab and ensure that the primary contact for device 1 is
Touchdown Left.
Digital Video Processor
Digital Video Processor: C2N- DVP4DI • 67