Analog Input Select, Transition And Duration - Crestron C2N-DVP4DI Reference Manual

Crestron C2N-DVP4DI
Zoom Video On-Screen
Background
Reveal Video On-Screen (From the West)
Background
Reference Guide – DOC. 6177A
Zoom
Window spirals in from a tiny dot to the selected size, and when another page is
selected, the opposite occurs.
Source: Composite Video Input
Reveal
Window is exposed from a selectable (N, S, E or W) direction. When another page is
selected, the window closes in the opposite direction. To illustrate this, the effect
would look like you were pulling down a projector screen handle to expose the
projector screen.
N – exposes from the south
S – exposes from the north
Source: Composite Video Input

Analog Input Select, Transition and Duration

The following steps are required to properly set up each video effect. The Pan effect
is used as an example.
1. In VT Pro-e, in the "Video Properties" window, under the Source tab, select
the type of join: Input Selection, Transition Duration, or Transition
Effect and Direction.
2. Assign a unique analog join number.
Digital Video Processor
E – exposes from the west
W – exposes from the east
Digital Video Processor: C2N- DVP4DI • 43