Crestron C2N-DVP4DI Reference Manual page 80

Digital Video Processor
76 • Contents
"RGB Video Properties" Window
3. In the "Project Properties" window Select the Pad Area tab. Select the Pad
Area 1 or Pad Area 2 area and select the following:
Type: Mouse,
Communications via: Cresnet,
and assign a serial join number to be used in SIMPL Windows.
"Project Properties" Window
4. Compile (F12) the project and load the project to the touchpanel.
5. In SIMPL Windows, add the C2N-DVP4DI to the project as either a master
or slave.
6. Add the Touch In Format symbol to the C2N-DVP4DI. Refer to "Device
Extender Symbols for Touch Input and Output Control" on page 61.
7. Extend the C2N-DVP4DI icon to display the slots.
8. Right click on Slot 1.
Crestron C2N-DVP4DI
Reference Guide – DOC. 6177A