Crestron C2N-DVP4DI Reference Manual page 105

Crestron C2N-DVP4DI
Reference Guide – DOC. 6177A
•
4x3 video, displays the 4x3 video in the proper aspect ratio within the 16x9
format and should appear as in figure 3.
•
16x9 RGB, displays the RGB source 1 in a 16x9 format, full screen.
•
4x3 RGB, displays the RGB source 2 in a 4x3 format and should appear as
in figure 3.
•
16x9 video, displays video source 2A. The video in this window must be
16x9 to display properly, if not, the 4x3 video will appear distorted.
Figure 6, 16x9 Grid Displayed on a 16x9 Display Device
2. Set the C2N-DVP4DI output for 16x9, either 720p or 1365. Refer to the
Setup Mode instructions in the C2N-DVP4DI Operations Guide (Doc.
6112).
NOTE: Setting the C2N-DVP4DI aspect ratio to 1280x1024 is actually for a 4x3
aspect ratio. This setting will not display 16x9 properly.
3. Use the 16x9 grid supplied above and set the projector (using its own
internal menus/remote) to 16x9 mode (wide or wide-screen mode). From
the setup menu (output) in the C2N-DVP4DI, follow the instructions for
video output setup in the C2N-DVP4DI Operations Guide (Doc. 6112) to
display the grid and get proper sizing edge-to-edge.
NOTE: All the output adjustments are to be done on the display device (projector,
plasma, etc.).
NOTE: Some projectors are only capable of displaying a 16x9 aspect ratio with a
particular input resolution (for example, 720p), and do not display 16x9 with any
other resolution.
NOTE: If the projector only does 4x3, the C2N-DVP4DI 16x9 output cannot make
the projector do 16x9. It will only be displayed as 4x3.
Digital Video Processor
Digital Video Processor: C2N- DVP4DI • 101