Advanced Features; Examples - Crestron C2N-DVP4DI Reference Manual

Crestron C2N-DVP4DI
Reference Guide – DOC. 6177A
Touchpanel Interface Symbol
7. Click Slot-03: Cresnet: C2Net-Device to open TPS Touchpanel.
8. Double click ID:03: TPS Touchpanel to open symbol.
9. Program the symbol according to the following graphic.
TPS Touchpanel Symbol

Advanced Features

One of the many exciting features of the C2N-DVP4DI is its ability to change a
video source on a selected page, instead of using page flips as described in the
previous projects. This is performed using analog joins. For example, you could add
buttons to the VT Pro-e project 1 'Logo' page that corresponds with all video
sources. You then assign analog join numbers to a video page in project 2 (for
example, Page 3: 'ST-Tune video 1B') selecting Input Selection as the type of join
from the Source tab of the "Video Properties" window. The SIMPL Windows
project has a digital to analog symbol and support logic symbols added and
programmed, and additional programming is added to the TPS and Touchpanel
Interface symbols (digital and analog joins). Once the projects are compiled and
loaded in the C2N-DVP4DI, pressing a video button on the touchpanel changes the
displayed video source without the need of page flips.

Examples

Example projects are available from the Creston FTP site
(ftp://ftp.crestron.com/Examples). Search for:
SIMPLE_PAGE_FLIP_TPS5000.VTZ
SIMPLE_PAGE_FLIP_ANALOG_CHANGES.VTZ
SIMPLE_PAGE_FLIP_MASTER_MODE.ZIP.
Digital Video Processor
Digital Video Processor: C2N- DVP4DI • 59