Table of Contents
Advertisement
Crestron C2N-DVP4DI
Reference Guide – DOC. 6177A
"Port Settings" Window, TCP/IP Selected
3. Enter the IP address of the configured C2N-DVP4DI and click OK. The
Viewport prompt displays either DVP4DI (master) or CSLAVE_DVP4DI
(slave).
4. Perform any of the diagnostics and features that Viewport provides.
Troubleshooting Communications via Ethernet
You can PING the C2N-DVP4DI from a MS-DOS
a Command Prompt (Windows NT/2000/XP). Ping means "to get the attention of" or
"to check for the presence of" another online device. Ping operates by sending a
packet to a designated address and waiting for a response.
The unit should reply and there should be no packet loss.
NOTE: Verify that the IP Settings of the C2N-DVP4DI are correct, and that the PC
used to ping the unit can ping other devices that are on the C2N-DVP4DI subnet.
MS-DOS or Command Screen
Digital Video Processor
®
prompt (Windows 95/98/Me) or
Digital Video Processor: C2N- DVP4DI • 27
Advertisement
Table of Contents
Troubleshooting
