Selecting A Video Source Effect And Duration - Crestron C2N-DVP4DI Reference Manual

Digital Video Processor
DVI/RGB 1
DVI/RGB 2
DVI/RGB 3
DVI/RGB 4
S-Video input 1 (Y&C)
S-Video input 2 (Y&C)
S-Video input 3 (Y&C)
S-Video input 4 (Y&C)
Video Input 1A composite
Video Input 2A composite
Video Input 3A composite
Video Input 4A composite
Video Input 1B composite
Video Input 2B composite
Video Input 3B composite
Video Input 4B composite
Video Input 1C composite
Video Input 2C composite
Video Input 3C composite
Video Input 4C composite
Component Video 1 (YPbPr)
Component Video 2 (YPbPr)
Component Video 3 (YPbPr)
Component Video 4 (YPbPr)
40 • Contents
Appearance Tab

Selecting a Video Source Effect and Duration

There are two ways of selecting a video source.
1. Page flips or sub-pages with video objects on the page.
2. Using analog values to change sources.
The following describes the second method of using analog values to select sources.
Source Tab in the "Video Properties" Window
The Source tab provides options for selecting video sources and controlling how the
video window appears on the screen.
Three sets of analog join numbers are assigned for each video effect.
•
Input Selection (assign join number for source)
•
Transition Duration (assign join number for effect time)
Crestron C2N-DVP4DI
Source Tab
Analog Input Selection,
Transition Duration
Transition Effect and
Direction
Default Input
Selection,
Transition and
Duration
Reference Guide – DOC. 6177A