Translucent Objects - Crestron C2N-DVP4DI Reference Manual

Crestron C2N-DVP4DI
Reference Guide – DOC. 6177A
Reveal
Reveal Selection
The reveal effect allows duration and direction settings.
Increases are made in 1/10 sec. increments, i.e. a value of 50 x 1/10 = 5 sec. (max. = 10 sec.)
VIDEO SOURCE EFFECT
Reveal East
Reveal South
Reveal West
Reveal North
NOTE: You can override fixed transitions and durations by assigning an analog join
number to the transition or duration in VT Pro-e. Also, in SIMPL Windows, create a
project using analog initializers to change the transitions and/or durations. An analog
transition or duration does not take effect until a new source is selected or a new
page is drawn.

Translucent Objects

The quality of translucency allows any object in your project to be seen through to
the video source below. This object quality is selected in VT Pro-e. The amount
(percentage) of see-through is set in this menu.
To program for translucency in VT Pro-e, double click on the object for which you
require translucency. The properties window for the object appears. Select the Effect
Tab and enable Translucent. Save and compile the project and download to the C2N-
DVP4DI.
Digital Video Processor
DIRECTION VALUE
1230
1231
1232
1233
Digital Video Processor: C2N- DVP4DI • 47
DURATION VALUE
0-100
0-100
0-100
0-100