Crestron C2N-DVP4DI Reference Manual page 67

Crestron C2N-DVP4DI
Reference Guide – DOC. 6177A
C2N-DVP4DI Touch Out Format Configuration Symbol
This symbol determines the pointing device output and enables the proper formatting
of the output string. Output can be via RS-232, Cresnet or Ethernet.
All of the Touch Out Format inputs are analog.
Setting a value for one of these joins tells the C2N-DVP4DI to output the control
strings in a particular format. The strings are issued on the Slot 1 Serial List on the
C2N-DVP4DI definition, on the first 16 outputs, starting at join #1.
The legal decimal values using the analog Init Symbol:
0 = Crestron Mouse Driver (this is the default and for "Touch the PC")
1 = ELO Driver (for Boekler Telestrator applications)
2 = SMART Matisse (older SMART format)
3 = SMART Board (newer SMART format)
4 = C2N-DVP4DI built-in telestrator
Each analog input corresponds to a video source and is linked to a serial output on
the C2I-TPS touchpanel interface, beginning with <text-o1>. As shown in the
following table, <DVI/RGB1> corresponds to <text-o1>, <DVI/RGB2>
corresponds to <text-o2>, <YC3> to <text-o7> and so forth.
Digital Video Processor
Digital Video Processor: C2N- DVP4DI • 63