Crestron C2N-DVP4DI Reference Manual page 82

Digital Video Processor
78 • Contents
"RGB Video Properties" Window
3. In the "RGB Video Properties" window select the Design tab. Select the
Pad 1 or Pad 2 area.
4. In the "Project Properties" window, select the Pad Area tab. Select the Pad
Area 1 or Pad Area 2 area and select the following:
Type: Mouse,
Communications via: TCP/IP
and assign a serial join number to be used in SIMPL Windows.
"
Project Properties" Window
5. Assign a Device ID number. This ID number must be added to the IPT of
the touchpanel.
6. Compile (F12) the project and load the project to the touchpanel.
7. In SIMPL Windows, add the C2N-DVP4DI to the project as a master.
Crestron C2N-DVP4DI
Reference Guide – DOC. 6177A