Device Extender Symbols For Touch Input And Touch Output Control - Crestron C2N-DVP4DI Reference Manual

Crestron C2N-DVP4DI
Reference Guide – DOC. 6177A
3. At the C2N-DVP4DI prompt (either >DVP4DI or >CSDVP4DI) type:
TOUCH 1.
4. Click Enter and reboot for the change to take effect.
Device Extender Symbols for Touch Input and
Touch Output Control
Two new device extenders are available for the C2I-TPS touchpanel interface on slot
01 of the C2N-DVP4DI for touch input and output control. After dropping in a C2N-
DVP4DI in SIMPL Windows, select Edit | Preferences and select Special from
Symbol Set.
SIMPL Windows Preferences – Special Symbol Set
Change to Program Manager, right mouse click on Slot 1 and choose C2N-DVP4DI
Touch In Format for inputs, or C2N-DVP4DI Touch Out Format for outputs.
Device Extender Symbols
•
The Touchpanel Sleep/Wake Manager is used with the Standby Timeout
feature. Refer to page 33 for additional details.
NOTE: The Packet Transmission selection is for future use.
•
The Touch In Format (serial) symbol is used when connecting a pointing
device indirectly (not to the Touchscreen/Mouse port).
•
The Touch Out Format (analog) symbol is used for controlling a PC or
telestrator through the C2N-DVP4DI.
Digital Video Processor
Digital Video Processor: C2N- DVP4DI • 61