Analog Values For Input Selection - Crestron CNX-DVP4 Operation Manual

Digital Video Processor
54 • Digital Video Processor: CNX-DVP4
2. Using analog values to change sources.
The following describes the second method of using analog values to select sources.
Source Tab in the "Video Properties" Window
There are three analog join numbers for each video effect.
•
Input Selection (type of effect)
•
Transition Duration (time)
•
Transition Effect and Direction (movement).
The Source tab provides options for selecting video sources and controlling how the
video window appears on the screen.
The Default area lets you specify the default video source from the Input Selection
List, and the transition effect.

Analog Values for Input Selection

When an analog join number is assigned to an input selection, setting the analog
joins value at runtime to the following values selects the corresponding input.
Returning the value to zero will return to the default input. The following analog
values correspond to each input video type.
Analog Values for Input Selection
ANALOG VIDEO INPUT
VALUE TYPE
1 DVI/RGB1
2 DVI/RGB2
3 DVI/RGB3
4 DVI/RGB4
5 S-Video Input 1
6 S-Video Input 2
7 S-Video Input 3
8 S-Video Input 4
Crestron CNX-DVP4
ANALOG VIDEO INPUT
VALUE TYPE
9 Video Input 1A
10 Video Input 1B
11 Video Input 2A
12 Video Input 2B
13 Video Input 3A
14 Video Input 3B
15 Video Input 4A
16 Video Input 4B
Operations Guide – DOC. 8170A
Source Tab
Input Selection
Default Area