Video Input Setup; Rgb Input Setup - Crestron C2N-DVP4DI Operation Manual

Crestron C2N-DVP4DI
Operations Guide – DOC. 6112

Video Input Setup

NOTE: Make sure you perform the Video Output Setup procedure first (refer to
page 20).
NOTE: Crestron recommends that you setup all RGB, S-video, component and
composite video sources.

RGB Input Setup

RGB video is setup using the Size, Position, Color, and Lock Sync, buttons (at the
bottom of the screen).
NOTE: The Lock Sync, Auto Calibrate, and Default Calibrate buttons only
appear for RGB video.
NOTE: DVI inputs do not have color or lock sync adjustments.
Lock Sync – A vertical (alternating black/white lines) line pattern screen is
recommended.
Size and Position – A vertical/horizontal line grid screen is recommended.
Color – Color bar and gray scale screens are recommended.
RGB Video Source Calibration
1. Click the Select Input button at the bottom of the screen and select input
RGB 1, 2, 3 or 4. The RGB buttons appear (refer to the following graphic).
RGB1 Selected
2. Select Auto Calibrate or Default Calibration.
that is performed in this Setup Menu for each input. You must select the source
and have it display before pressing Auto Calibrate. You can return to this setup
screen when you want to perform auto calibrate in the future.
Digital Video Processor
Auto Calibrate automatically adjusts the input setting. It
looks at the sync for front and back porch, and sets them
for the selected input. Auto calibrate is a one-time setting
Digital Video Processor: C2N-DVP4DI • 25