Part 1: Fpga Development Board Introduction - Alinx AX7050 User Manual

Part 1: FPGA Development Board Introduction

The entire structure of the AX7050 FPGA development board is inherited
from our consistent core board + Carrier Board model. A high-speed
inter-board connector is used between the core board and the Carrier Board.
The core board is mainly composed of FPGA + DDR3 + QSPI FLASH,
which undertakes the functions of high-speed data processing and storage of
FPGA, high-speed data reading and writing between FPGA and two DDR3s,
data bit width is 32 bits, and the bandwidth of the whole system is up to 10Gb.
/s(333.3M*32bit); The two DDR3 capacities are up to 8Gbit, which meets the
need for high buffers during data processing. The selected FPGA is the
XC7S50FGGA484 chip of XILINX's Spartan7 series, in FGGA484 package.
The AX7050 Carrier Board expands its rich peripheral interface, including
1 Gigabit Ethernet interface, 1 HDMI Output interface, 1 USB2.0 interface, 1
UART serial interface, 1 SD card slot, 1 JTAG debug interface, 1 camera
interface, 1-way 40-pin expansion header, RTC circuit and EEPROM.
6 / 52
Spartan-7 FPGA Development Board AX7050 User Manual
Amazon Store: https://www.amazon.com/alinx