Reset Button Connector; Serial Port Connectors; Figure 3-16: Reset Button Connector Location; Table 3-17: Reset Button Connector Pinouts - IEI Technology WAFER-CV-D25501 Series User Manual

3.2.15 Reset Button Connector

CN Label: RST_BTN1
2-pin wafer
CN Type:
CN Location: See Figure 3-16
CN Pinouts: See Table 3-17
The reset button connector is connected to a reset switch on the system chassis to enable
users to reboot the system when the system is turned on.

Figure 3-16: Reset Button Connector Location

Pin Description
1
RESET+
2
RESET-

Table 3-17: Reset Button Connector Pinouts

3.2.16 RS-232 Serial Port Connectors
CN Label: COM2, COM3
CN Type: 10-pin header
CN Location: See Figure 3-17
CN Pinouts: See Table 3-18
Each of these connectors provides RS-232 connections.
Page 30
WAFER-CV-D25501/N26001 3.5" SBC