MCK EXTender 7000 Installation Manual page 42

The following menu appears:
2. Press the → key to access the parameters.
3. Press the → key to the Address parameter. Enter the IP Address of the EXTender and press Enter.
4. Press the ↓ key to the Subnet Mask parameter. Enter the IP Address of the Subnet Mask and press
Enter.
5. Press the ↓ key to the Default Router parameter. Enter the IP Address of the Default Router and press
Enter.
6. If you want to enable Telnet access, press the ← key to access the IP Menu.
7. Press the ↓ key to the Telnet parameter. If necessary, press the → key to set the parameter to Enabled.
8. If you want to enable web browser access, press the ↓ key to the Web Server parameter. If necessary,
press the → key to set the parameter to Enabled.
9. Press the ← key to accept changes and return to the Configuration Menu.
10. Press the ↓ key to the Save option.
11. Press Enter to save changes to the active config (.rem) file.
TM
EXTender 7000 Installation Guide
Figure 3-22: IP Address Menu
Figure 3-23: Enabling the LAN
Page 42