Add/Drop Pvc - T1 Frame Relay; T1/Pri Port (Wan3) Configuration - T1 Frame Relay; Please Refer To "Add/Drop - T1/Pri Port (Wan3) - Leased T1 Parameters On Page' 53; Assigning Add/Drop Pvc - MCK EXTender 7000 Installation Manual

5. Set Connect Type to Add_Drop1. Note: Add/Drop1 will allocate DS0 channels to WAN1 and Add/Drop2
will allocate DS0 channels to WAN2.

Add/Drop PVC - T1 Frame Relay

T1/PRI Port (WAN3) Configuration - T1 Frame Relay

Please refer to "Add/Drop - T1/PRI Port (WAN3) - Leased T1 Parameters on page' 53.

Assigning Add/Drop PVC

1. Use the arrow keys to access the following PVC_Setup menu.
MI Path
Configuration->Connect->T1/Frame_Relay->PVC Setup
TM
EXTender 7000 Installation Guide
Figure 4-6: Add/Drop Channel Setup
Figure 4-7: T1/PVC Setup Menu
Page 55